新型悬浮无轨平移门产品包括：机箱、底梁、上梁、下传动齿条、上传动齿条、主传动轮、伺服电机、下活动槽、上活动槽、从传动轮、加强柱、竖梁、斜杆、导向柱、门排后拉杆、门柱、防撞保护层、导向槽；
The new type of suspended trackless sliding door products include: chassis, bottom beam, upper beam, lower transmission rack, upper transmission rack, main transmission wheel, servo motor, lower movable slot, upper movable slot, secondary transmission wheel, reinforcement column, vertical beam, diagonal rod, guide column, door truss rear pull rod, door column, collision protection layer, and guide slot;
新型悬浮无轨平移门
New type of suspended trackless sliding door
产品技术的好处是：
The benefits of product technology are:
1、新型悬浮无轨平移门产品替代了有轨运动，其通过辅助移动机构和传动机构分别设置在平移门结构的上下端，传动机构通过带动平移结构在水平方向上进行运动，这样很好的缩小了平移门使用的受限范围，扩大了平移门广泛使用的范围；
1. The new type of floating trackless sliding door product replaces the track motion, which is set at the upper and lower ends of the sliding door structure through an auxiliary moving mechanism and a transmission mechanism. The transmission mechanism drives the sliding structure to move in the horizontal direction, which effectively reduces the limited range of use of the sliding door and expands its widespread use;
2、通过配合结构在辅助移动机构与传动机构的对称设置，平移门在运动时更好的提高了其稳固的性能；
2. By coordinating the symmetrical arrangement of the auxiliary moving mechanism and transmission mechanism in the structure, the translational door improves its stability performance better during movement;
3、通过导向柱在门柱与机箱之间的设置，防止其由于外界阻力而造成倾斜，平移门在运行时的稳定性进一步的得以提高；
3. By setting the guide pillar between the door pillar and the chassis to prevent it from tilting due to external resistance, the stability of the sliding door during operation is further improved;
4、通过多个加强柱与竖梁固定连接在底梁与上梁之间的设置，不但能起到防护作用，与此同时，还能够通过其镂空的结构特征在有强大风力的时候更好的抵御侵袭；
4. The installation of multiple reinforced columns and vertical beams fixedly connected between the bottom beam and the upper beam can not only provide protection, but also better resist invasion in strong wind conditions through its hollow structural features;
5、底梁与地面由于是不会接触到的，因此不需要设置导轨，更不需要在平移门下端设置滑轨，这样就很好的缩小了平移门受限的范围；
5. Since the bottom beam does not come into contact with the ground, there is no need to set guide rails, let alone slide rails at the lower end of the sliding door, which effectively reduces the limited range of the sliding door;